Відео

I have not tested on such surface yet

Iron paint it's quite hard to work with, this works on Silver, gold and Nickel conductive paint.

Yes

@@MarvinSevilla-gl2gm how much does this cost in general if i had a 5 inch tall figure

The Green Reducer is just Nickel Sulfate at about 20 grams per litter of DI water.

Thanks, and the last one is nickel chloride?

@@akshaykumarvyas No, it's an electroless plating solution. Send me an email to nicamarvin2005@yahoo.com and I will share the details I purchased from a Russian source a few years ago.

@@nicamarvinthanks, i have sent you a mail just now.

Sent you an email

Oil based Polyurethane Wood Varnish.

I get a very grey/silver finish when applying a clear coat over the chrome paint, losing all the reflective effect. Any idea why this could be happening? Is your paint still chrome reflective after a final clear coat?

@@GogocraftFR What is your exact process. Please describe it as I have not lost any of the chrome. I have a video of the finished product on daylight.

@@nicamarvin primer, wet sanding, black base coat, 2k clear coat Until here, no problem. Then: Mirror effect spray paint 2 hours later a 2K clear coat. This last step is where it just blends into a grey silverfish paint. Still metallic, but very cheap looking.

@@GogocraftFR Try the Wood Polyurethane, the one used as Wood Varnish. don't worry if it has a yellowish tint when liquid.

I Used Minwax Oil based Polyurethane Wood Varnish

No, for 3D prints I lower the temperature to 155(150 being the lowest and 160 the maximum)

Is that degress or celcius? And what temperature do you head for plastics?

Hello, I sent you an email with the Formula and additional info. When using the Caswell Electroless process I plate the parts at a lower temperature of about 155-160 no more than that and it works. The reducer is simply just Nickel Sulfate as prewash just before electroless nickel, you can skip it if you like.

I have, but it's not good. I would try other translucent colors like Tamiya Translucent.

@@nicamarvinawesome. Thank you for the tip. Hope things are on the upswing for you.

Hi super cool video. Question where you buy the printer? I try to find that but not success...

@@elmaquinistaindustries5550 ​@elmaquinistaindustries5550 I ordered the part to be printed from IN3DTEC rapid Prototyping company

All its on the Basecoat, it needs to be glass like.

Yes, its conductive

Caswell Plating Electroless Nickel For plastics.

Yes, with the Caswell Electroless Nickel Plating for Plastics kit.

@@AngelSevilla-fk6im 🙏

Why would you want to?

@@aaroneckardt5514 so it looks cool

Yes, on Steel/Iron, Nickel, Cobalt also on Copper/Brass if you have the part come in contact with a steel hanger

@@nicamarvin thanks

@@6atlantis Check this video where he uses the process to coat a golf article, look at the hook he is using to hang the part on the electroless bath, it's made out of Copper, Copper alone is not catalytic, but once in contact with a catalytic metal(Iron/steel, Nickel, Cobalt) it's going to be coated. ua-cam.com/video/f487RuyG1AY/v-deo.html

No, it does not. You can purchase it from Angel Gilding

I ordered another ball in TPU90A in SLS 3D Printer. TPU does not break but might not bounce correctly.

www.amazon.com/Filings-Magnetic-Powder-Education-Projects/dp/B00UUCKHL0

​@@nicamarvinty so much!! Im trying this on CBD nugs. I have an electroplating system, but this seems so much easier.

My Sensitizer has gone bad, so it will take me a few days to get it. Let me check

@@nicamarvin Yes, I will wait for the results

This is for Aesthetic purposes only. like spray on Chrome or chrome paint. but it can be used as a conductive paint alternative for high detail parts.

Angel Gilding sells smaller concentrate. angelgilding.com/palladium-sensitizer-concentrate.html I have used their chemicals for more than a decade. But keep in mind that once you mix the palladium concentrate to use it, the shelf life of the mixture is short, You have about 24-48 hours to use it. While the one sold by Caswell Plating is already mixed and has aditives that keep it from going bad.

Yes, it works on Alclad and Spaz stix

NO, I got the Printable model from the Internet and had the model printed from a Chinese company and shipped to me.

I made it myself. It's call EZKrome, it's not available yet but I am trying to get it out soon.

I am ordering a few samples on TPU 90(EOS SLS 3D Printer), anything lower than that then the bounce is absorbed by the TPU and the ball just will not bounce much.

It's Normal Electroless Nikel so it can be applied to properly cleaned, Steel/Iron, Nickel, Cobalt and their alloys. With the help of Contact plating one can plate over Copper, Gold, Silver by making them come in contact with an iron hanger. It's

Yes, all you need is to keep the Nickel Electrolyte at 160 degrees or higher.

Copper Metal Needs to be in contact with steel/iron or nickel metal while immersed

No, That's My EZkrome Chrome paint. I had plan to release it, but been struggling with health issues and a pretty bad Divorce. So that has been bump down on my priority list.